There are various types of drywalls depending on the task and the place where it will be used and installed. As one of the most important benefits that drywalls offer is the presence of pointed or tapered edges on the long edges of the sheets of drywall that, when joined together, forms a thin recess for drywall tape and joint compound that permits invisible finished joints.
There is additionally an ECO board produced using reused material to make drywall that resembles concrete. There are many names used for drywall such as Sheetrock (U.S. Gypsum Corporation product.), gypsum board, wallboard, gyp board and plasterboard.
Moisture-resistant drywall or just Green board drywall has a green covering that makes it more resilient to moisture than regular drywall. It is a little bit more expensive but one should remember that it is not waterproof so do not use it if it going to make contact with water. Mostly it is used as a tile backer in limited wet areas like basement walls and bathroom, also in laundry and utility rooms and kitchens.
Usually, regular drywall or whiteboard is white on one side and brown on the other. It comes in various sizes varying in thickness 3/8 inches to one inch and it is also probably most financial drywall type. This is the most well-known sort utilized and is typically available in four by eight-foot boards.
Paper drywall is being replaced by paperless drywall. Instead of paper, this type of drywall is covered with fibreglass, that protects the gypsum board from rotting and proposes even greater resistance to mildew and mould.
Although the quality of the wallboard is a bit tougher than regular drywall, some constructors find it easier to cut. To achieve a clean and smooth finish drywall level, paperless drywall has some minor textures that will need applying joint compound.
Plaster baseboard is the other name of the blue board drywall. Blue board is utilized for fake or veneer plastering, and the surface paper has exceptional absorption characteristics. it has a vast mould and water resistance and there are lesser steps involved in veneer plastering.
Blue board drywall isn’t made for tape, mud or paint. It is well suited for bathroom or places with a lot of moisture or wet area and it also helps in reducing noise.
Soundproof drywall is made out of overlaid drywall made with a blend of wood filaments, gypsum, and polymers expanding the STC (sound transmission class). This type of drywall is a bit denser than regular drywall so it may be a bit harder to cut than other varieties of the drywall. It is used in places where noise is a problem or when someone requires silence in the room, due to its soundproofing properties.
Purple drywall offers the same profits as the regular drywall but with greater mould and moisture resistant characteristics. It can also be used for a ceiling and all wall applications and is perfectly suited where improved mould and moisture is required. It is a good choice if it is going to be in contact with water.
Type X Drywall is also well known as the so-called fire-resistant drywall. To achieve a higher fire rating, many layers of thickness can be used. Usually, it is used in rooms, garages and apartment buildings because it is needed by many building codes. It can be harder to cut and use than regular drywall.
Special non-combustible fibres are used to make Type X drywall. It usually comes in 5/8-inches thickness and the extra thickness is also able to improve its soundproofing characteristics. The “Type X” designation can be received if a gypsum board can achieve at least a one-hour fire-resistance rating 5/8-inch board or a 3/4 – hour rating for 1/2 – inch board in a sole coating nailed on each face of load-enduring wood framing members.